Conference and Seminar Proceedings

REFERENCE FRAMES IN PRACTICE SEMINAR

4-5 May 2018, Istanbul, Turkey

 

Friday 4 May 2018

08:30 – 09:00 Welcome and Opening Remarks

Prof. Dr. Muzaffer Kahveci (Convenor)
Prof. Dr. Volker Schwieger (International Federation of Surveyors-FIG)
Ms. Sharafat Gadimova (International Committee on Global Navigation Satellite Systems-ICG)
Dr. Dan Roman (International Association of Geodesy-IAG)


09:00 – 10:00 Session 1: Introduction to 3D/Vertical Reference Frames

  1. Introduction to 3D Reference Frames
    Mr. Nic Donnelly, Land Information New Zealand
    [handouts]
  2. Introduction to Vertical Reference Frames and Datums
    Dr. Dan Roman, NOAA National Geodetic Survey National Oceanic& Atmospheric Administration
    [handouts]

10:00 – 10:30 Morning Tea

10:30 – 11:30 Session 2: Kinematic Frames and Deformation Modelling

  1. Kinematic Frames and Deformation Modelling
    Dr. Chris Pearson, University of Otago
    [handouts]
  2. Practical implementation of time-dependent reference frames
    Mr. Richard Stanaway, UNSW Sydney
    [handouts]

11:30 – 12:30 Lunch

12:30 – 13:30 Session 3: Dynamic Datum and Modelling of Crustal Deformation

  1. Development of deformation models to support Dynamic and semi-dynamic Datums
    Dr. Chris Pearson, University of Otago
    [handouts]
  2. Crustal deformations in Fennoscandia, and Dynamic reference frames: case study Iceland
    Dr. Martin Lidberg, Lantmäteriet – the Swedish Mapping Cadastral and Land registration Authority
    [handouts]

13:30 – 14:30 Session 4: Case Studies 1

  1. Case Study of Europe (ETRS89 and ERVS)
    Dr. Martin Lidberg, Lantmäteriet – the Swedish Mapping Cadastral and Land registration Authority
    [handouts]
  2. Case study of USA
    Dr. Dan Roman, NOAA National Geodetic Survey National Oceanic& Atmospheric Administration
    [handouts]
14:30 – 15:00 Afternoon Tea

15:00 – 16:00 Session 5: Case Studies 2

  1. Case Study of Russia
    Dr. Leonid Lipatnikov, Siberian State University of Geosystems and Technology
  2. Case study of New Zealand
    Mr. Graeme Blick, Land Information New Zealand
    [handouts]

16:00 – 17:30 Session 6: 3D & Vertical Control Network and Earthquakes in Turkey

  1. Height Reference System Modernization in Turkey: Current Status and Future Plans
    Assoc. Prof. Dr. Hasan Yildiz, General Command of Mapping
    [handouts]
  2. Semi-Dynamic Reference Frame Realization in Turkey: Towards an Improved Velocity Field Model
    Dr. Ali İhsan Kurt, General Command of Mapping
    [handouts]
  3. Monitoring Seismo-geodetic Behaviour of Earth's Crust in Marmara Region: KandilliNet
    Prof. Dr. Haluk Ozener, Bogazici University, Kandilli Observatory and Earthquake Research Institute

17:30 – 19:00 Session 7: International Geodesy Initiatives and Geodetic Infrastructure

  1. ICG at UN
    Ms. Sharafat Gadimova, United Nations Office for Outer Space Affairs
    [handouts]
  2. United Nations Global Geospatial Information Management (UN-GGIM)
    Dr. Dan Roman, NOAA National Geodetic Survey National Oceanic& Atmospheric Administration
    [handouts]
  3. Sponsor presentations
19:30 Seminar Dinner
 

Saturday 5 May 2018

09:00 – 10:00 Session 8: GNSS and Geodetic Software

  1. Introduction of RTK-LIB
    Mr. Ryan Ruddick, Geoscience Australia, Dr. Suelynn Choy, RMIT University
    [handouts]
  2. Introduction to the SNAP least squares computation software
    Mr. Nic Donnelly, Land Information New Zealand
10:00 – 10:30 Morning Tea

10:30 – 11:30 Software Demonstration

Mr. Ryan Ruddick, Geoscience Australia, Dr. Suelynn Choy, RMIT University, Mr. Nic Donnelly, Land Information New Zealand

*Transfers will be done with Midibusses.

11:30 Closing Remarks – FIG Commission 5, IAG

12:00 – 12:30 Lunch (Lunch Box)

Afternoon: Technical Tour in North Anatolian Fault Zone

  • 12:30 – 13:00  Departure from İstanbul Congress Center to İzmit Science Center
  • 13:00 – 14:00  Arriving to İzmit Science Center
  • 14:30 – 15:30  Visiting Science Center and SEKA Paper Museum
  • 15:30 – 16:00  Coffee Break
  • 16:00 – 17:00  Promotion and Presentation
  • 17:00 – 17:15  Gift Distribution
  • 17:15 – 17:30  A Short Tour at Seismology Center
  • 17:30 – 19:00  Returning to İstanbul Congress Center


©2020 FIG